Lorem ipsum dolor prumus versus lorem.

Forex & Stock

Lorem ipsum dolor prumus versus lorem.

Lorem ipsum dolor prumus versus lorem.

3.1. If Statements¶

The statements introduced in this chapter will involve tests or conditions . More syntax for conditions will be introduced later, but for now consider simple arithmetic comparisons that directly translate from math into Python. Try each line separately in the Shell

 2 < 5 
 3 > 7 
 x = 11 
 x > 10 
 2 * x < x 

You see that conditions are either True or False (with no quotes!). These are the only possibleBooleanvalues (named after 19th century mathematician George Boole). In Python the name Boolean is shortened to the type bool . It is the type of the results of true-false conditions or tests.

Run this example program, suitcase.py. Try it at least twice, with inputs: 30 and then 55. As you an see, you get an extra result, depending on the input. The main code is:

weight = float(input("How many pounds does your suitcase weigh? ")) if weight > 50: print("There is a $25 charge for luggage that heavy.") print("Thank you for your business.") 

The middle two line are an if statement. It reads pretty much like English. If it is true that the weight is greater than 50, then print the statement about an extra charge. If it is not true that the weight is greater than 50, then don’t do the indented part: skip printing the extra luggage charge. In any event, when you have finished with the if statement (whether it actually does anything or not), go on to the next statement that isnot indented under the if . In this case that is the statement printing “Thank you”.

The general Python syntax for a simple if statement is

if condition :

If the condition is true, then do the indented statements. If the condition is not true, then skip the indented statements.

Another fragment as an example:

 if balance < 0: transfer = -balance # transfer enough from the backup account: backupAccount = backupAccount - transfer balance = balance + transfer 

As with other kinds of statements with a heading and an indented block, the block can have more than one statement. The assumption in the example above is that if an account goes negative, it is brought back to 0 by transferring money from a backup account in several steps.

In the examples above the choice is between doing something (if the condition is True ) or nothing (if the condition is False ). Often there is a choice of two possibilities, only one of which will be done, depending on the truth of a condition.

Run the example program, clothes.py . Try it at least twice, with inputs 50 and then 80. As you can see, you get different results, depending on the input. The main code of clothes.py is:

temperature = float(input('What is the temperature? ')) if temperature > 70: print('Wear shorts.') else: print('Wear long pants.') print('Get some exercise outside.') 

The middle four lines are an if-else statement. Again it is close to English, though you might say “otherwise” instead of “else” (but else is shorter!). There are two indented blocks: One, like in the simple if statement, comes right after the if heading and is executed when the condition in the if heading is true. In the if - else form this is followed by an else: line, followed by another indented block that is only executed when the original condition isfalse . In an if - else statement exactly one of two possible indented blocks is executed.

A line is also shown outdented next, about getting exercise. Since it is outdented, it is not a part of the if-else statement: It is always executed in the normal forward flow of statements, after the if - else statement (whichever block is selected).

The general Python if - else syntax is

if condition:




These statement blocks can have any number of statements, and can include about any kind of statement.

SeeGraduate Exercise

All the usual arithmetic comparisons may be made, but many do not use standard mathematical symbolism, mostly for lack of proper keys on a standard keyboard.

Meaning Math Symbol Python Symbols
Less than < <
Greater than > >
Less than or equal <=
Greater than or equal >=
Equals = ==
Not equal !=

There should not be space between the two-symbol Python substitutes.

Notice that the obvious choice forequals , a single equal sign, isnotused to check for equality. An annoying second equal sign is required. This is because the single equal sign is already used forassignmentin Python, so it is not available for tests.


It is a common error to use only one equal sign when you mean totest for equality, and not make an assignment!

Tests for equality do not make an assignment, and they do not require a variable on the left. Any expressions can be tested for equality or inequality (!=). They do not need to be numbers! Predict the results and try each line in theShell :

 x = 5 
 x == 5 
 x == 6 
 x != 6 
 x = 6 
 6 == x 
 6 != x 
 'hi' == 'h' + 'i' 
 'HI' != 'hi' 
 [1, 2] != [2, 1] 

An equality check does not make an assignment. Strings are case sensitive. Order matters in a list.

Try in theShell :

When the comparison does not make sense, an Exception is caused. [1]

Following up on the discussion of theinexactnessof float arithmetic inString Formats for Float Precision , confirm that Python does not consider .1 + .2 to be equal to .3: Write a simple condition into the Shell to test.

Here is another example: Pay with Overtime. Given a person’s work hours for the week and regular hourly wage, calculate the total pay for the week, taking into account overtime. Hours worked over 40 are overtime, paid at 1.5 times the normal rate. This is a natural place for a function enclosing the calculation.

Readthe setup for the function:

 def calcWeeklyWages(totalHours, hourlyWage): '''Return the total weekly wages for a worker working totalHours, 
with a given regular hourlyWage. Include overtime for hours over 40. 

The problem clearly indicates two cases: when no more than 40 hours are worked or when more than 40 hours are worked. In case more than 40 hours are worked, it is convenient to introduce a variable overtimeHours. You are encouraged to think about a solution before going on and examining mine.

You can try running my complete example program, wages.py, also shown below. The format operation at the end of the main function uses the floating point format ( String Formats for Float Precision ) to show two decimal places for the cents in the answer:

 def calcWeeklyWages(totalHours, hourlyWage): '''Return the total weekly wages for a worker working totalHours, 
with a given regular hourlyWage. Include overtime for hours over 40. 
''' if totalHours <= 40: totalWages = hourlyWage*totalHours else: overtime = totalHours - 40 totalWages = hourlyWage*40 + (1.5*hourlyWage)*overtime return totalWages def main(): hours = float(input('Enter hours worked: ')) wage = float(input('Enter dollars paid per hour: ')) total = calcWeeklyWages(hours, wage) print('Wages for {hours} hours at ${wage:.2f} per hour are ${total:.2f}.' .format(**locals())) main() 

Here the input was intended to be numeric, but it could be decimal so the conversion from string was via float , not int .

Below is an equivalent alternative version of the body of calcWeeklyWages , used in wages1.py . It uses just one general calculation formula and sets the parameters for the formula in the if statement. There are generally a number of ways you might solve the same problem!

if totalHours <= 40: regularHours = totalHours overtime = 0 else: overtime = totalHours - 40 regularHours = 40 return hourlyWage*regularHours + (1.5*hourlyWage)*overtime 

Write a program, graduate.py , that prompts students for how many credits they have. Print whether of not they have enough credits for graduation. (At Loyola University Chicago 120 credits are needed for graduation.)

Save the example program jumpFuncStub.py as jumpFunc.py , and complete the definitions of functions jump and main as described in the function documentation strings in the program. In the jump function definition use an if - else statement (hint [2]). In the main function definition use a for -each loop, the range function, and the jump function.

The jump function is introduced for use in Strange Sequence Exercise , and others after that.

Often you want to distinguish between more than two distinct cases, but conditions only have two possible results, True or False , so the only direct choice is between two options. As anyone who has played “20 Questions” knows, you can distinguish more cases by further questions. If there are more than two choices, a single test may only reduce the possibilities, but further tests can reduce the possibilities further and further. Since most any kind of statement can be placed in an indented statement block, one choice is a further if statement. For instance consider a function to convert a numerical grade to a letter grade, ‘A’, ‘B’, ‘C’, ‘D’ or ‘F’, where the cutoffs for ‘A’, ‘B’, ‘C’, and ‘D’ are 90, 80, 70, and 60 respectively. One way to write the function would be test for one grade at a time, and resolve all the remaining possibilities inside the next else clause:

 def letterGrade(score): if score >= 90: letter = 'A' else: # grade must be B, C, D or F if score >= 80: letter = 'B' else: # grade must be C, D or F if score >= 70: letter = 'C' else: # grade must D or F if score >= 60: letter = 'D' else: letter = 'F' return letter 

This repeatedly increasing indentation with an if statement as the else block can be annoying and distracting. A preferred alternative in this situation, that avoids all this indentation, is to combine each else and if block into an elif block:

 def letterGrade(score): if score >= 90: letter = 'A' elif score >= 80: letter = 'B' elif score >= 70: letter = 'C' elif score >= 60: letter = 'D' else: letter = 'F' return letter 

The most elaborate syntax for an if - elif - else statement is indicated in general below:

if condition1 :


elif condition2 :


elif condition3 :


elif condition4 :




The if , each elif , and the final else line are all aligned. There can be any number of elif lines, each followed by an indented block. (Three happen to be illustrated above.) With this constructionexactly oneof the indented blocks is executed. It is the one corresponding to thefirst True condition, or, if all conditions are False , it is the block after the final else line.

Be careful of the strange Python contraction. It is elif , not elseif . A program testing the letterGrade function is in example program grade1.py .

SeeGrade Exercise .

A final alternative for if statements: if - elif -.... withno else . This would mean changing the syntax for if - elif - else above so the final else: and the block after it would be omitted. It is similar to the basic if statement without an else , in that it is possible fornoindented block to be executed. This happens ifnoneof the conditions in the tests are true.

With an else included,exactlyone of the indented blocks is executed. Without an else , atmostone of the indented blocks is executed.

 if weight > 120: print('Sorry, we can not take a suitcase that heavy.') 
 elif weight > 50: print('There is a $25 charge for luggage that heavy.') 

This if - elif statement only prints a line if there is a problem with the weight of the suitcase.

Write a program sign.py to ask the user for a number. Print out which category the number is in: 'positive' , 'negative' , or 'zero' .

In Idle, load grade1.py and save it as grade2.py Modify grade2.py so it has an equivalent version of the letterGrade function that tests in the opposite order, first for F, then D, C, .... Hint: How many tests do you need to do? [3]

Be sure to run your new version and test with different inputs that test all the different paths through the program.

* Modify the wages.py or the wages1.py example to create a program wages2.py that assumes people are paid double time for hours over 60. Hence they get paid for at most 20 hours overtime at 1.5 times the normal rate. For example, a person working 65 hours with a regular wage of $10 per hour would work at $10 per hour for 40 hours, at 1.5 * $10 for 20 hours of overtime, and 2 * $10 for 5 hours of double time, for a total of

10*40 + 1.5*10*20 + 2*10*5 = $800.

You may find wages1.py easier to adapt than wages.py .

The power of a language like Python comes largely from the variety of ways basic statements can becombined . In particular, for and if statements can be nested inside each other’s indented blocks. For example, suppose you want to print only the positive

numbers from an arbitrary list of numbers in a function with the following heading.Readthe pieces for now.

 def printAllPositive(numberList): '''Print only the positive numbers in numberList.''' 

For example, suppose numberList is [3, -5, 2, -1, 0, 7] . You want to process a list, so that suggests a for -each loop,

but a for -each loop runs thesamecode body for each element of the list, and we only want

forsomeof them. That seems like a major obstacle, but think closer at what needs to happen concretely. As a human, who has eyes of amazing capacity, you are drawn immediately to the actual correct numbers, 3, 2, and 7, but clearly a computer doing this systematically will have to checkevery number. In fact, there is aconsistentaction required: Every number must be tested to seeifit should be printed. This suggests an if statement, with the condition num > 0 . Try loading into Idle and running the example program onlyPositive.py , whose code is shown below. It ends with a line testing the function:

 def printAllPositive(numberList): '''Print only the positive numbers in numberList.''' for num in numberList: if num > 0: print(num) printAllPositive([3, -5, 2, -1, 0, 7]) 

This idea of nesting if statements enormously expands the possibilities with loops. Now different things can be done at different times in loops, as long as there is aconsistent test to allow a choice between the alternatives. Shortly, while loops will also be introduced, and you will see if statements nested inside of them, too.

The rest of this section deals with graphical examples.

Run example program bounce1.py . It has a red ball moving and bouncing obliquely off the edges. If you watch several times, you should see that it starts from random locations. Also you can repeat the program from the Shell prompt after you have run the script. For instance, right after running the program, try in the Shell

The parameters give the amount the shape moves in each animation step. You can try other values in theShell , preferably with magnitudes less than 10.

For the remainder of the description of this example,readthe extracted text pieces.

The animations before this were totally scripted, saying exactly how many moves in which direction, but in this case the direction of motion changes with every bounce. The program has a graphic object shape and the central animation step is

but in this case, dx and dy have to change when the ball gets to a boundary. For instance, imagine the ball getting to the left side as it is moving to the left and up. The bounce obviously alters the horizontal part of the motion, in fact reversing it, but the ball would still continue up. The reversal of the horizontal part of the motion means that the horizontal shift changes direction and therefore its sign:

but dy does not need to change. This switch does not happen at each animation step, but only when the ball reaches the edge of the window. It happens only some of the time - suggesting an if statement. Still the condition must be determined. Suppose the center of the ball has coordinates (x, y). When x reaches some particular x coordinate, call it xLow, the ball should bounce.


The edge of the window is at coordinate 0, but xLow should not be 0, or the ball would be half way off the screen before bouncing! For the edge of the ball to hit the edge of the screen, the x coordinate of the center must be the length of the radius away, so actually xLow is the radius of the ball.

Animation goes quickly in small steps, so I cheat. I allow the ball to take one (small, quick) step past where it really should go ( xLow ), and then we reverse it so it comes back to where it belongs. In particular

There are similar bounding variables xHigh , yLow and yHigh , all the radius away from the actual edge coordinates, and similar conditions to test for a bounce off each possible edge. Note that whichever edge is hit, one coordinate, either dx or dy, reverses. One way the collection of tests could be written is

 if x < xLow: dx = -dx 
 if x > xHigh: dx = -dx 
 if y < yLow: dy = -dy 
 if y > yHigh: dy = -dy 

This approach would cause there to be some extra testing: If it is true that x < xLow , then it is impossible for it to be true that x > xHigh , so we do not need both tests together. We avoid unnecessary tests with an elif clause (for both x and y):

if x < xLow: dx = -dx elif x > xHigh: dx = -dx if y < yLow: dy = -dy elif y > yHigh: dy = -dy

Note that the middle if isnotchanged to an elif , because it is possible for the ball to reach acorner , and need both dx and dy reversed.

The program also uses several accessor methods for graphics objects that we have not used in examples yet. Various graphics objects, like the circle we are using as the shape, know their center point, and it can be accessed with the getCenter() method. (Actually a clone of the point is returned.) Also each coordinate of a Point can be accessed with the getX() and getY() methods.

This explains the new features in the central function defined for bouncing around in a box, bounceInBox . The animation arbitrarily goes on in a simple repeat loop for 600 steps. (A later example will improve this behavior.)

 def bounceInBox(shape, dx, dy, xLow, xHigh, yLow, yHigh): '''

Animate a shape moving in jumps (dx, dy), bouncing when its center reaches the low and high x and y coordinates. ''' delay = .005 for i in range(600): shape.move(dx, dy) center = shape.getCenter() x = center.getX() y = center.getY() if x < xLow: dx = -dx elif x > xHigh: dx = -dx if y < yLow: dy = -dy elif y > yHigh: dy = -dy time.sleep(delay)

The program starts the ball from an arbitrary point inside the allowable rectangular bounds. This is encapsulated in a utility function included in the program, getRandomPoint . The getRandomPoint function uses the randrange function from the module random . Note that in parameters for both the functions range and randrange , the end stated ispastthe last value actually desired:

 def getRandomPoint(xLow, xHigh, yLow, yHigh): '''Return a random Point with coordinates in the range specified.''' x = random.randrange(xLow, xHigh+1) y = random.randrange(yLow, yHigh+1) return Point(x, y)

The full program is listed below, repeating bounceInBox and getRandomPoint for completeness. Several parts that may be useful later, or are easiest to follow as a unit, are separated out as functions. Make sure you see how it all hangs together or ask questions!

 Show a ball bouncing off the sides of the window. 
 ''' from graphics import * 
 import time, random def bounceInBox(shape, dx, dy, xLow, xHigh, yLow, yHigh): ''' Animate a shape moving in jumps (dx, dy), bouncing when 
its center reaches the low and high x and y coordinates. 
''' delay = .005 for i in range(600): shape.move(dx, dy) center = shape.getCenter() x = center.getX() y = center.getY() if x < xLow: dx = -dx elif x > xHigh: dx = -dx if y < yLow: dy = -dy elif y > yHigh: dy = -dy time.sleep(delay) def getRandomPoint(xLow, xHigh, yLow, yHigh): '''Return a random Point with coordinates in the range specified.''' x = random.randrange(xLow, xHigh+1) y = random.randrange(yLow, yHigh+1) return Point(x, y) def makeDisk(center, radius, win): '''return a red disk that is drawn in win with given center and radius.''' disk = Circle(center, radius) disk.setOutline("red") disk.setFill("red") disk.draw(win) return disk def bounceBall(dx, dy): '''Make a ball bounce around the screen, initially moving by (dx, dy) 
at each jump.''' win = GraphWin('Ball Bounce', 290, 290) win.yUp() radius = 10 xLow = radius # center is separated from the wall by the radius at a bounce xHigh = win.getWidth() - radius yLow = radius yHigh = win.getHeight() - radius center = getRandomPoint(xLow, xHigh, yLow, yHigh) ball = makeDisk(center, radius, win) bounceInBox(ball, dx, dy, xLow, xHigh, yLow, yHigh) win.close() bounceBall(3, 5) 

Write a program short.py with a function printShort with heading:

 def printShort(strings): '''Given a list of strings, 
print the ones with at most three characters. 
>>> printShort(['a', 'long', one']) 

In your main program, test the function, calling it several times with different lists of strings. Hint: Find the length of each string with the len function.

The function documentation here models a common approach: illustrating the behavior of the function with a Python Shell interaction. This begins with a line starting with >>> . Other exercises and examples will also document behavior in the Shell.

Write a program even1.py with a function printEven with heading:

 def printEven(nums): '''Given a list of integers nums, 
print the even ones.>>> printEven([4, 1, 3, 2, 7]) 

In your main program, test the function, calling it several times with different lists of integers. Hint: A number is even if its remainder, when dividing by 2, is 0.

Write a program even2.py with a function chooseEven with heading:

 def chooseEven(nums): '''Given a list of integers, nums, 
return a list containing only the even ones.>>> chooseEven([4, 1, 3, 2, 7]) 
[4, 2] 

In your main program, test the function, calling it several times with different lists of integers and printing the results. Hint: Create a new list, and append the appropriate numbers to it.

* The madlib2.py program has its getKeys function, which first generates a list of each occurrence of a cue in the story format. This gives the cues in order, but likely includes repetitions. The original version of getKeys uses a quick method to remove duplicates, forming a set from the list. There is a disadvantage in the conversion, though: Sets are not ordered, so when you iterate through the resulting set, the order of the cues will likely bear no resemblance to the order they first appeared in the list. That issue motivates this problem:

Copy madlib2.py to madlib2a.py , and add a function with this heading:

 def uniqueList(aList): ''' Return a new list that includes the first occurrence of each value 
in aList, and omits later repeats. The returned list should include 
the first occurrences of values in aList in their original order.>>> vals = ['cat', 'dog', 'cat', 'bug', 'dog', 'ant', 'dog', 'bug'] 
>>> uniqueList(vals) 
['cat', 'dog', 'bug', 'ant'] 

A useful Boolean operator is in , checking membership in a sequence:

 >>> vals = ['this', 'is', 'it] 
 >>> 'is' in vals 
 >>> 'was' in vals 

It can also be used with not , as not in , to mean the opposite:

 >>> vals = ['this', 'is', 'it] 
 >>> 'is' not in vals 
 >>> 'was' not in vals 

In general the two versions are:

item in sequence

item not in sequence

Hint: Process aList in order. Use the new syntax to only append elements to a new list that are not already in the new list.

After perfecting the uniqueList function, replace the last line of getKeys , so it uses uniqueList to remove duplicates in keyList .

Check that your madlib2a.py prompts you for cue values in the order that the cues first appear in the madlib format string.

To be eligible to graduate from Loyola University Chicago, you must have 120 creditsanda GPA of at least 2.0. This translates directly into Python as acompound condition :

 credits >= 120 and GPA >=2.0 

This is true if both credits >= 120 is true and GPA >= 2.0 is true. A short example program using this would be:

 credits = float(input('How many units of credit do you have? ')) 
 GPA = float(input('What is your GPA? ')) 
 if credits >= 120 and GPA >=2.0: print('You are eligible to graduate!') 
 else: print('You are not eligible to graduate.') 

The new Python syntax is for the operator and :

condition1 and condition2

The compound condition is true if both of the component conditions are true. It is false if at least one of the conditions is false.

SeeCongress Exercise .

In the last example in the previous section, there was an if - elif statement where both tests had the same block to be done if the condition was true:

 if x < xLow: dx = -dx 
 elif x > xHigh: dx = -dx 

There is a simpler way to state this in a sentence: If x < xLow or x > xHigh, switch the sign of dx. That translates directly into Python:

 if x < xLow or x > xHigh: dx = -dx 

The word or makes another compound condition:

condition1 or condition2

is true ifat leastone of the conditions is true. It is false if both conditions are false. This corresponds tooneway the word “or” is used in English. Other times in English “or” is used to meanexactly onealternative is true.


When translating a problem stated in English using “or”, be careful to determine whether the meaning matches Python’s or .

It is often convenient to encapsulate complicated tests inside a function. Think how to complete the function starting:

 def isInside(rect, point): '''Return True if the point is inside the Rectangle rect.''' pt1 = rect.getP1() pt2 = rect.getP2() 

Recall that a Rectangle is specified in its constructor by two diagonally oppose Point s. This example gives the first use in the tutorials of the Rectangle methods that recover those two corner points, getP1 and getP2 . The program calls the points obtained this way pt1 and pt2 . The x and y coordinates of pt1 , pt2 , and point can be recovered with the methods of the Point type, getX() and getY() .

Suppose that I introduce variables for the x coordinates of pt1 , point , and pt2 , calling these x-coordinates end1 , val , and end2 , respectively. On first try you might decide that the needed mathematical relationship to test is

Unfortunately, this is not enough: The only requirement for the two corner points is that they be diagonally opposite, not that the coordinates of the second point are higher than the corresponding coordinates of the first point. It could be that end1 is 200; end2 is 100, and val is 120. In this latter case val isbetween end1 and end2 , but substituting into the expression above

is False. The 100 and 200 need to be reversed in this case. This makes a complicated situation. Also this is an issue which must be revisited for both the x and y coordinates. I introduce an auxiliary function isBetween to deal with one coordinate at a time. It starts:

 def isBetween(val, end1, end2): '''Return True if val is between the ends. 
The ends do not need to be in increasing order.''' 

Clearly this is true if the original expression, end1 <= val <= end2 , is true. You must also consider the possible case when the order of the ends is reversed: end2 <= val <= end1 . How do we combine these two possibilities? The Boolean connectives to consider are and and or . Which applies? You only need one to be true, so or is the proper connective:

A correct but redundant function body would be:

 if end1 <= val <= end2 or end2 <= val <= end1: return True 
 else: return False 

Check the meaning: if the compound expression is True , return True . If the condition is False , return False - in either case return the samevalue as the test condition. See that a much simpler and neater version is to just return the value of the condition itself!

 return end1 <= val <= end2 or end2 <= val <= end1 


In general you shouldnotneed an if - else statement to choose between true and false values! Operate directly on the boolean expression.

A side comment on expressions like

Other than the two-character operators, this is like standard math syntax,chainingcomparisons. In Python any number of comparisons can bechainedin this way, closely approximating mathematical notation. Though this is good Python, be aware that if you try other high-level languages like Java and C++, such an expression is gibberish. Another way the expression can be expressed (and which translates directly to other languages) is:

 end1 <= val and val <= end2 

So much for the auxiliary function isBetween . Back to the isInside function. You can use the isBetween function to check the x coordinates,

 isBetween(point.getX(), p1.getX(), p2.getX()) 

and to check the y coordinates,

 isBetween(point.getY(), p1.getY(), p2.getY()) 

Again the question arises: how do you combine the two tests?

In this case we need the point to be both between the sidesand between the top and bottom, so the proper connector isand .

Think how to finish the isInside method. Hint: [4]

Sometimes you want to test the opposite of a condition. As in English you can use the word not . For instance, to test if a Point was not inside Rectangle Rect, you could use the condition

 not isInside(rect, point) 

In general,

not condition

is True whenconditionis False , and False when conditionis True .

The example program chooseButton1.py , shown below, is a complete program using the isInside function in a simple application, choosing colors. Pardon the length. Do check it out. It will be the starting point for a number of improvements that shorten it and make it more powerful in the next section. First a brief overview:

The program includes the functions isBetween and isInside that have already been discussed. The program creates a number of colored rectangles to use as buttons and also as picture components. Aside from specific data values, the code to create each rectangle is the same, so the action is encapsulated in a function, makeColoredRect . All of this is fine, and will be preserved in later versions.

The present main function is long, though. It has the usual graphics starting code, draws buttons and picture elements, and then has a number of code sections prompting the user to choose a color for a picture element. Each code section has a long if - elif - else test to see which button was clicked, and sets the color of the picture element appropriately.

 '''Make a choice of colors via mouse clicks in Rectangles -- 
 A demonstration of Boolean operators and Boolean functions.''' from graphics import * def isBetween(x, end1, end2): '''Return True if x is between the ends or equal to either. 
The ends do not need to be in increasing order.''' return end1 <= x <= end2 or end2 <= x <= end1 def isInside(point, rect): '''Return True if the point is inside the Rectangle rect.''' pt1 = rect.getP1() pt2 = rect.getP2() return isBetween(point.getX(), pt1.getX(), pt2.getX()) and\isBetween(point.getY(), pt1.getY(), pt2.getY()) def makeColoredRect(corner, width, height, color, win): ''' Return a Rectangle drawn in win with the upper left corner 
and color specified.''' corner2 = corner.clone() corner2.move(width, -height) rect = Rectangle(corner, corner2) rect.setFill(color) rect.draw(win) return rect def main(): win = GraphWin('pick Colors', 400, 400) win.yUp() # right side up coordinates redButton = makeColoredRect(Point(310, 350), 80, 30, 'red', win) yellowButton = makeColoredRect(Point(310, 310), 80, 30, 'yellow', win) blueButton = makeColoredRect(Point(310, 270), 80, 30, 'blue', win) house = makeColoredRect(Point(60, 200), 180, 150, 'gray', win) door = makeColoredRect(Point(90, 150), 40, 100, 'white', win) roof = Polygon(Point(50, 200), Point(250, 200), Point(150, 300)) roof.setFill('black') roof.draw(win) msg = Text(Point(win.getWidth()/2, 375),'Click to choose a house color.') msg.draw(win) pt = win.getMouse() if isInside(pt, redButton): color = 'red' elif isInside(pt, yellowButton): color = 'yellow' elif isInside(pt, blueButton): color = 'blue' else : color = 'white' house.setFill(color) msg.setText('Click to choose a door color.') pt = win.getMouse() if isInside(pt, redButton): color = 'red' elif isInside(pt, yellowButton): color = 'yellow' elif isInside(pt, blueButton): color = 'blue' else : color = 'white' door.setFill(color) win.promptClose(msg) main() 

The only further new feature used is in the long return statement in isInside .

 return isBetween(point.getX(), pt1.getX(), pt2.getX()) and\isBetween(point.getY(), pt1.getY(), pt2.getY()) 

Recall that Python is smart enough to realize that a statement continues to the next line if there is an unmatched pair of parentheses or brackets. Above is another situation with a long statement, but there are no unmatched parentheses on a line. For readability it is bestnotto make an enormous long line that would run off your screen or paper. Continuing to the next line is recommended. You can make thefinalcharacter on a line be a backslash (\) to indicate the statement continues on the next line. This is not particularly neat, but it is a rather rare situation. Most statements fit neatly on one line, and the creator of Python decided it was best to make the syntax simple in the most common situation. (Many other languages require a special statement terminator symbol like ‘;’ and pay no attention to newlines). Extra parentheses here would not hurt, so an alternative would be

 return (isBetween(point.getX(), pt1.getX(), pt2.getX()) and isBetween(point.getY(), pt1.getY(), pt2.getY()) ) 

The chooseButton1.py program is long partly because of repeated code. The next section gives another version involving lists.

A person is eligible to be a US Senator who is at least 30 years old and has been a US citizen for at least 9 years. Write an initial version of a program congress.py to obtain age and length of citizenship from the user and print out if a person is eligible to be a Senator or not.

A person is eligible to be a US Representative who is at least 25 years old and has been a US citizen for at least 7 years. Elaborate your program congress.py so it obtains age and length of citizenship and prints out just theoneof the following three statements that is accurate:

  1. You are eligible for both the House and Senate.
  2. You eligible only for the House.
  3. You are ineligible for Congress.

Here are a few more string methods useful in the next exercises:

  • s .startswith( pre )

    returns True if stringsstarts with stringpre : Both '-123'.startswith('-') and 'downstairs'.startswith('down') are True , but '1 - 2 - 3'.startswith('-') is False .

  • s .endswith( suffix )

    returns True if stringsends with stringsuffix : Both 'whoever'.endswith('ever') and 'downstairs'.endswith('airs') are True , but '1 - 2 - 3'.endswith('-') is False .

  • s .replace( sub , replacement , count )

    returns a new string with up to the firstcountoccurrences of string subreplaced byreplacement . Thereplacementcan be the empty string to deletesub . For example:

     s = '-123' 
     t = s.replace('-', '', 1) # t equals '123' 
     t = t.replace('-', '', 1) # t is still equal to '123' 
     u = '.2.3.4.' 
     v = u.replace('.', '', 2) # v equals '23.4.' 

In library alphabetizing, if the initial word is anarticle(“The”, “A”, “An”), then it is ignored when ordering entries. Write a program completing this function, and then testing it:

 def startsWithArticle(title): '''Return True if the first word of title is "The", "A" or "An".''' 

Be careful, if the title starts with “There”, it does not start with an article. What should you be testing for?

** In the laterSafe Number Input Exercise , it will be important to know if a string can be converted to the desired type of number. Explore that here. Save example isNumberStringStub.py as isNumberString.py and complete it. It contains headings and documentation strings for the functions in both parts of this exercise.

A legal whole number string consists entirely of digits. Luckily strings have an isdigit method, which is true when a nonempty string consists entirely of digits, so '2397'.isdigit() returns True , and '23a'.isdigit() returns False , exactly corresponding to the situations when the string represents a whole number!

In both parts be sure to test carefully. Not only confirm that all appropriate strings return True . Also be sure to test that you return False forallsorts of bad strings.

  1. Recognizing an integer string is more involved, since it can start with a minus sign (or not). Hence the isdigit method is not enough by itself. This part is the most straightforward if you have worked on the sectionsString IndicesandString Slices . An alternate approach works if you use the count method fromObject Orientation , and some methods from this section.

    Complete the function isIntStr .

  2. Complete the function isDecimalStr , which introduces the possibility of a decimal point. The string methods mentioned in the previous part remain useful.

Category: Spread

Similar articles: